Laying Process Description: ⑴ First check the flatness of basketball courts plastic runway of the base layer, for leveling on uneven parts (such as cement concrete foundation for an acid). ⑵ primer laying: laying of foundation cleaned first before the end of plastic, ready for construction tools. a) in accordance with the process required to measure the position of the badminton courts plastic runway construction line, place construction lines. b) laying side starting from the site, according to the width of disposable plastic scraper site. c) even when the squeegee speed, timely show the bottom of the recess, the projection of the conduct glue or gelling. d) after a plastic plastic track, for the audience to be checked to ensure that the surface of plastic laid thickness. ⑶ surface plastic paving: try to shorten a) Squeegee every barrel of glue intervals cell plastic track, so that uniform gelation speed. b) always observe the thickness of the plastic surface. c) shave gel, in front of uncured rubber, sprinkle with red particles, wait until the fully cured, the excess rubber surface cleaned. Construction technical indicators: the proportion of indicated value ± 0.10 Hardness (HS) 45 ~ 65 Tensile strength (kgf / c㎡ (Mpa) 25 (2.45) over the tear strength (kgf / cm (N / mm) 10 (98) extends above Long rate of 250% over 35% compression set and abrasion resistance above 2.5 or less hardness (HS) changes in the original hardness value of ± 5 badminton courts plastic runway, Sichuan plastic track, Camry sports by the Dongguan City Camry Sports Facilities Engineering Co. company Dongguan City Camry Sports Facilities Engineering Co., Ltd. (www.kmtyss.com) strong, credible, in Dongguan, Guangdong related products industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovation philosophy will lead the Camry into the brilliant sports and you work for a better future!